iSpring Whole House Water Filter System, Model: WGB32B-MKS
iSpring Whole House Water Filter System, Model: WGB32B-MKS
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
iSpring Whole House Water Filter System, Model: WGB32B-MKS
- Cutting-Edge Filtration: Our system employs advanced water purification with three specialized filters. The first-stage FP25B polypropylene sediment filter captures minute particles (down to 5 microns). The second-stage FG25B-KS compound filter targets a broad spectrum of contaminants, including chlorine, chloramine, lead, mercury, hydrogen sulfide, heavy metals, and PFAS. The third-stage FM25B iron water filter is dedicated to reducing iron levels (up to 3.0 ppm) and manganese (up to 1.0 ppm).
- Effortless Installation: Experience DIY simplicity with our user-friendly manual and instructional YouTube videos. Featuring 1” NPT inlet/outlet connections and 20” x 4.5” filter cartridges, the installation process is seamless.
- Exceptional Performance and Longevity: Enjoy robust water flow, providing up to 15 GPM throughout your household with minimal pressure drop. Designed to cater to a family of four, our filters ensure clean water for up to a year, depending on your water quality and usage.
- Important Note - TDS Preservation: Unlike RO membranes, our system preserves essential minerals (TDS) while effectively removing harmful chemicals. For TDS reduction, explore our iSpring Reverse Osmosis (RO) systems.
- Freshness Guaranteed: Individually wrapped cartridges ensure freshness; unwrap them before use for optimal performance.
Product Description
The First Stage Water Filter
- iSpring FP25B multi-layer filtration effectively reduces clogs and minimizes pressure loss, ensuring that your entire filtration system operates smoothly.
- This filter is designed to eliminate sediments, dust, sand, silt, and rust from your water supply.
The Second Stage Water Filter
- iSpring FG25B-KS targets chlorine, chloramine, PFAS, lead, mercury, hydrogen sulfide, heavy metals, herbicides, odors, and more.
- For water with high hardness (TDS/Total Dissolved Solids > 300 ppm), consider adding a water softener like iSpring WCS45KG before your filtration system for best results.
The Third Stage Water Filter
- iSpring FM25B water filter effectively reduces iron (up to 3 ppm) and manganese (up to 1 ppm).
- If your iron level is above 3 ppm, or manganese level above 1 ppm, please consider iSpring WCFM500K high capacity iron, manganese, and hydrogen sulfide reducing whole house water filter system instead.
Improve your Quality of Life
- Cooking, bathing, and washing clothes with filtered water keeps you away from bad-tasting, smelly, and contaminated water that does harm to you.
- The filtered water also helps to extend the lifespan of your plumbing system and the household appliances, releasing your burden on plumbing repair.
Do I still need a water softener if my water is hard?
Yes. Our WGB32B-MKS whole house water filter does not reduce hardness. It is recommended to install a water softener, such as the iSpring WCS45KG model, before this system if your TDS level is above 300 ppm.
Can I install this system outdoors?
Install indoors in a well-ventilated area, shielded from wind and rain, away from direct sunlight and heat. Consider water leakage protection. For outdoor installation, ensure insulation for frost, sun, and waterproofing for both unit and pipes.
Can I use this system if my water flow is from left to right?
Yes, you can. However, please note that the inlet/outlet marking on the system is fixed, so you will need to flip the machine head to accommodate this setup. To do this, simply remove the screws on the machine head and flip it.
Specifications
| Peak Flow Rate | 15 GPM |
| Minimum Working Pressure | 25 psi |
| Maximum Working Pressure | 80 psi |
| Operating Temperature | 40-100 ºF |
| pH Range | 6 - 11 |
| Inlet/Outlet | 1 inch |
